Mkove MK75 Battery Monitor – Instruction Manual
Panel Mounting of the Battery Monitor
The MK75 is designed for panel mounting. Included with the package are two clips which allow
for easy installation and removal of the battery monitor. These slide into the rear of the battery
monitor on either side and a series of ratchet points allow for making a firm connection against the
back of the panel. The design of the clips will support up to a 7mm panel thickness.
The size of the square hole which needs to be made in the panel is at least 78mm x 56mm. These
dimensions can be up to 6mm larger in either direction due to the flange around the battery monitor.
Mkove Electronics
Page 6
