Safety precautions
· The connection and installation of electrical devices may only be carried out by a qualified
electrician.
· Interventions in and changes to the device result in the voiding of the warranty claim.
· Observe your national regulations and the respective safety provisions.
· Fixed and flexible conductors of up to 2,5 mm
2
may be attached to the external terminal clips.
· Flexible cables with a cross-section ≤ 1 mm
2
should not be attached.
General information
· Deactivation commands take priority over activation commands.
· If the power supply is correct, the dots shown between the hours and minutes (
HH
:
MM
) are
displayed permanently. The dots flash if the power supply is interrupted.
· If there is no power supply, the position indicator display goes out after 1 minute (sleep-function).
· The whole display flashes the battery needs to be changed for up to 2 weeks to warn that.
2
Do not dispose of with your normal household waste. DO NOT BURN.
The Timeswitch contains a Lithium ion battery.
Disposal
At the end and of their useful life the battery should be disposed of via suitable recycle centre.
Inductive loads, particularly compact fluorescent lamps or energy saving lamps, place a heavy stress
on the switching contacts. If in doubt about the ability of the Timeswitch to directly switch a particular
If in doubt please consult the Technical Sales and Service Department for assistance.
Note
load it is advisable to install the Timeswitch in conjunction with a suitable relay or contactor.
