S-125/S-125C/S-85/S-85C
page 12
S125/85/Cman.pm5
rev 3
08/30/96
13. SPECIFICATIONS
S-125 & S-125C
S-85 & S-85C
IMPEDANCE:
4 ohms
4 ohms
MINIMUM POWER:
10 watts RMS
10 watts RMS
RECOMMENDED POWER:
(applies to both models)
amplifiers with between 50 and 200 watts RMS or more (see below)
MAXIMUM POWER:
(applies to both models)
200 watts RMS unclipped peaks
FREQUENCY RESPONSE:
77 Hz - 20 KHz ± 2 dB
85 Hz - 20 KHz ± 2 dB
DIMENSIONS (H x W x D):
Left/Right speaker
18 1/2" x 6 1/4" x 8 1/4"
10 1/2" x 6 1/4" x 8 1/4"
Center Channel speaker
6 1/4" x 18 1/2" x 8 1/4"
6 1/4" x 10 1/2" x 8 1/4"
WEIGHT
16 lbs.
9 lbs.
FIGURE 3
USE WITH AN OMNIMOUNT
®
BRACKET
S-125 (not S-125C) or S-85
USES OMNIMOUNT
®
53-RST
A single 3/8" x 16 threaded insert is
located on the back baffle of the
cabinet. Use only an OmniMount
®
53 RST (special order) bracket.
S-125 and S-125C
USES OMNIMOUNT
®
75-WA
or 53-RST (see below)
Two threaded inserts are
located at the bottom of the
back baffle of the cabinet
Mount the bracket to the
speaker using 5/8" long 1/4" x 20
pan head or round head machine
screws. Use an OmniMount
®
Series 75 mounting bracket.
The drawings below are from the OmniMount catalog and are not intended to show the actual dimensions and
specific mounting locations on the S-125 and S-85. Please see the back baffles of your speaker cabinets.
