POWER SUPPLY
PVC 36V DC
QuickFix
®
3+
LO
W
LED
BOX
ANIM
DMX
BEE
X
QuickFix
®
LED BOX anim, dmx
QuickFix
®
LED BOX
QuickFix
®
LED Main Connector
QuickFix
®
Main Connector
Code
Dimension
Weight
min.
LED
max.
LED
Outlets
Protection
Max. Load per
Outlet
Max. Total Load
Nominal voltage
014-143
80 x 35 x 23 mm
0.15 kg
40
200
1
x *
7.2 W
7.2 W
100-240 V AC 50-60Hz 1.58 - 7.9
-
014-144
162 x 35 x 23 mm
0.30 kg
100
500
1
x *
18 W
18 W
100-240 V AC 50-60Hz 3.96 - 19.8
-
014-145
107 x 85 x 25 mm
0.45 kg
195
975
1
x *
35 W
35 W
100-240 V AC 50-60Hz 7.7 - 38.5
-
014-146
160 x 72 x 42 mm
0.75 kg
390
1975
1
x *
70 W
70 W
100-240 V AC 50-60Hz 15.21 - 77
-
014-031
200 x 72 x 42 mm
0.89 kg
660
3300
1
x *
120 W
120 W
100-240 V AC 50-60Hz 26.4 - 132
-
014-151
240 x 72 x 42 mm
1.07 kg 1100 5500
1
x *
200 W
200 W
100-240 V AC 50-60Hz
44 - 220
-
* Protection against: short circuit, overload, overtemperature
QuickFix
®
Point
System
Read this instruction manual before use!
Recommended temperature range -20°C to +40°C
You find more detailed product Information
in our product catalogue or on
www.mk-illumination.com
Manual
QuickFix
®
Product
Nominal voltage
1 Product can be used outdoors and indoors.
2 Ensure that the product is appropriately protected against temperature
changes, which may result in damage from contraction and expansion.
3 Not to be used by children as a toy. Keep out of reach of small children.
4 Never install this product when it’s switched on!
5 Do not cut, shorten or change the product in any way!
6 Never switch the product on while it is still in the packaging.
7 Never use this product under water or with wet hands!
8 Never use this product near objects that burn or explode easily!
9 Do not use this product during a storm, it could happen an over-voltage.
10 Do not position this product near heaters or any direct source of heat.
11 Only use the product in a well ventilated and cooled environment.
12 Don’t cover the product and don’t wrap paper or foils around the it.
13 If you are using this product outdoors, always use an IP-X4 outdoor socket for
connecting it to the mains supply.
14 When using the product outdoors, always use a residual current circuit-breaker
(max. FI-30mA) between mains (220 - 240V) and the product.
15 Always disconnect from the mains when the product is not in use.
16 During operation, you must not disconnect the connected products. At the end
of operational, please disconnect the product from the mains voltage, and then
the lighting products.
17 Take care not to damage the cable or insulation!
18 Always make sure that all connections are secured and screwed together
tightly.
19 Never connect the product with any other electrical product, only those
manufactured by MK-Illumination.
20 Never connect this product with filament products. Not 12V or 24V compatible.
21 If this product is damaged please destroy.
22 Always dispose damaged products accordingly.
23 This product must be installed by a qualified specialist!
24
Always contact a qualified electrician for technical questions.
25 Keep this instruction manual!
With QUICK FIX® you are free to combine many different products together. As
they have different power consumptions you have to calculate before hand if the
planned combination is safe - does not exceed the allowed wattage Watch out for
QuickFix®!
Step 1: Find out the maximum load possible
Single product load (W) x number of products interconnectable = max. load possible
(W) per product
Step 2: Check the product information
For combinations of different products the max. electrical
loading must not exceed the max. loading capacity of the
product with the lowest wattage.
Warnings & Precautions
Instructions for safe product combinations
Warnings - Mounting
Warnings - Before you start
26 Pay close attention to this manual and stay within it’s warnings and precautions
while using the product!
27 Always ensure that the voltage mentioned on the mains connector is
compatible to your power supply before use!
28 Before use check the product for damaged wiring.
29 This product must not be used without all gaskets beeing in place.
30 Don’t install the product if it is very cold. Cracks in the insulation can be the
result. Risk of electric shock.
31 Ensure that the supply cord is not subject to mechanical stress.
32 Don’t hang any objects at the product.
33 Note, that the life span of this product depends on the way you handle with it
when assembling, dismantalling and how it is stored.
34 Handle this product carefully and appropriately.
35
Always make sure that norm VDE 0100 or your specific country norm is obeyed
during installation.
36 Outdoor installation shall only be done during dry weather conditions.
37 Never use any heavy, sharp edged tools or mounting accessories (e.g. metal
wires) to install the product. They could damage the wiring, causing short
circuits. This can lead to fire.
38 Always mount the product securely and as straight as possible. Don‘t let the
product hang loose or swing!
39 When plastic strings, cable strips, adhesive tape or screw bridges are used
for installing the product, take care not to fix the parts too tight and that the
mechanical pressure on the product is not too high. This could result in a
damage of the insulation.
40 Do not hit the product with a hammer or other tool as this could damage the
product!
41 If the product is installed to hang freely, it must be attached using a steel cable
and clipped to it every 10 cm.
42 Make sure you are installing the product with appropriate torsion relief’s.
43 The power supply does not rely upon the luminaire enclosure for protection
against accidental contact with live parts.
Only use this QuickFix® Product with QuickFix®
Main Connector!
