16
Filling Fuel Tank
Skid Plate Installation
WARNING
1. Gasoline is highly flammable and explosive. You can be burned or seriously
injured when handling fuel.
2. To fuel, stop engine if running, and allow it to cool.
3. Refuel in a well-ventilated area.
4. Keep gasoline away from appliance pilot lights, barbeques, electric appliances,
power tools, etc.
5. Wipe up spills immediately. Do not start engine until spill is dry.
1. Fuel can damage paint and plastic. Be careful not to spill fuel when filling the
fuel tank. Damage caused by spilled fuel IS NOT covered under the warranty.
2. DO NOT use stale or contaminated gasoline, or an oil/gasoline mixture.
NOTE:
(A)
Remove the Fuel Cap. Refer to
Engine Manual for details.
(B)
Ensure fuel level is 1" below the
throat of the Fuel Tank.
1 inch (25mm)
from throat
(A)
Hook front of Skid Plate over pin
on front plunger.
(B)
Insert pin through Skid Plate
and rear plunger.
Maximum
Fuel Level
(C)
Ensure fuel level is below the
top of the strainer filter.
Maximum
Fuel Level
EARLY ENTRY CONCRETE SAW ASSEMBLY
(C)
Replace the Blade Guard and
tighten Blade Guard Nut.
