MJX F39 Shuttle, Инструкция по эксплуатации, Страница: 13 / 14

11
Trouble shooting
When the helicopter is finished signal connection and is not under
shooting condition, the indicator light of the videography module keeps
constant "on".When press the shooting switch on the remote controller,
it begins shooting and the indicator light turns from constant "on" to
flashing, press the shooting switch again, shooting will stop.
After shooting is finished, take out the TF memory card from the
videography module and insert it into the card reader(Pic. 12), then,
insert the card reader into the USB interface of the computer to watch
the video.
Pic9 Pic10 Pic11 Pic12
Problem
No reaction
from the
helicopter
1.The helicopter is underpowered. 1.Get the battery of the helicopter charged
2.The indicator light of the helicopter
flashing rapidly, and the gyo is in
the testing statement 2.Set the helicopter down to a platform, until the
indicator light turn to constant ”ON” without
blinking.
3.Repeating the connection procedure.
3.the helicopter and the transmitter
is out of radio connection
Reason Solution
Video control
Insert the TF memory card into the videography module.(Pic9)
Fix the videography module onto the bottom of the helicopter by
screws.(Pic10)
Open the helicopter nose and insert the plug of the videography module
into the video control socket, then, reinstall the helicopter nose.(Pic11)
How to install the videography device
TIPS
To stop shooting, please press the shooting switch on the remote controller.
Directly unplug the battery cable or take out the TF memory card from the
videography module will result in loss of the video data.
To avoid helicopter crash,please do not insert or take out the TF memory
card from the videography module,when the circuit is on. TF memory card
should be installed before circuit is on and take out after shooting switch is
turned off.
When crash occurs,turn off the helicopter and then turn on the power to
recover normal working.