MJX Bugs 16 Скачать руководство пользователя страница 20

Transmitter and aircraft signal matching

Press the button “   ” without releasing and turn on the transmitter. The transmitter will have Beep 

   Beep Sound, then releasing the button. The signal strength icon changes from the weak to strong 

   circularly, It means the transmitter is under signal matching.

Install aircraft battery, long press the power button of aircraft to turn on the aircraft. In this time, 

   the aircraft will have a power-on sound and the indication light stays on. After signal matching, the 

   transmitter will have a long Beep sound. The signal strength icon displays the current signal strength, 

   then the signal matches successfully.

The Operation of Aircraft

Flight restrictions and special area restrictions

According to the regulations of the International Civil Aviation Organization and the air traffic control of 

various countries on airspace control and the regulations of the management of drones, drones must fly 

in the specified airspace. For flight safety, the flight restriction function is turned on by default, including 

altitude and distance restrictions and special area flight restrictions, to help users use the aircraft more 

safely and legally.

Flight

Surroundings Requirements of the Flight

1. Whether the transmitter, aircraft battery and phone are fully charged.

2. Whether the propelleres are installed correctly.

3. Whether the front and rear arms and propellers are fully unfolded.

4. After the power turned on, whether the camera and gimbal work.

5. Make sure the camera lens is clean.

6. Ensure to use official accessories or officially certified accessories. The non-official accessories may 

    cause damage of the aircraft.

Pre-Flight Inspection

1. Do not fly in bad weather, such as strong wind, snow, rain, fog, etc.

2. Choose an open place without tall buildings around to fly. Buildings that use a lot of steel bars will 

    affect the work of the compass and block the GPS signal, causing poor positioning of the aircraft or 

    even unable to locate.

3. When flying, keep the aircraft in sight, stay away from obstacles, crowds, water, etc.

4. Do not fly in areas with high-voltage lines, communication base stations or transmission towers, 

    avoiding interference with the transmitter.

5. When flying at the place whose altitude above 6000m, due to environmental factors, the performance 

    of the aircraft battery and power system will decrease, and the flight performance will be affected 

    correspondingly. Please fly with caution.

6. The aircraft cannot use GPS to fly in the north and south poles.

-18-

Содержание Bugs 16































Отзывы: