MJX R/C X103W, Руководство пользователя

Страница: 22 / 28

How to lock and unlock the drone
● To unlock the drone: Press the red button “ ” . The motors will start rotating, the drone is unlocked.
● To lock the drone: After the drone lands on the ground, press the red button “ ” for 3 seconds, the
motors will stop rotating and the drone is locked.
!
Warning
:
NEVER
attempt to lock the drone by pressing the “ ” button when the
drone is airborn !!! Or the drone
WILL
crash and be damaged.
Gyroscope calibration
!
After the drone and the remote controller are bound, set the drone on a flat surface (Pic. 1), push and
hold both joystick to the lower left position (Pic. 2) to calibrate the gyro. Once the drone front lights turn
from flashing to solid on, the gyro calibration completes successfully.
● The gyroscope calibration was done at the factory. Gyroscope calibration is not needed
unless the drone can not exit the drone initialization detection procedure.
● Please make sure to set the drone on a flat horizontal surface when performing calibration,
failure to do this will affect the flight characteristics.
Pic. 1
Pic. 2
X103W User Manual
-20-