MJM MTF21, Руководство пользователя

Страница: 9 / 14

9
Settings
To enter the settings menu press and hold the “+” and “
–
” buttons
together for a couple seconds. The display will change and you will see
multiple icons. Use the “+” and “
–
” buttons to toggle through the settings,
use the “i” button to select.
Wheel
Setting the wheel diameter.
Use the “+” and “
–
” buttons to
adjust the wheel diameter then
press “i” to confirm. The setting
for the MTF21 must be set to 28.
Speed Limit
All our bikes are set to 32km/hr.
Brightness
Adjust display brightness.
Voltage
Sets the voltage output of the
bike at each power assist level.
The default is 48V. It is not
recommended you change
these settings.
Advanced
See advanced settings section.
Dormancy
Sets how long the bike will stay
on before shutting off when there
is no input. The default is 5 minutes.
Unit
Can toggle between metric
and imperial measurements.
Password
If you would like to set a password
to lock the display whenever the
bike turns off, you can set that here.
The default is no password.
Factory
This will reset everything back
to its original factory settings.
Display
To reset the trip select
“Trip Reset” with the “i” button so
the “NO” turns yellow. Once “NO”
is highlighted yellow press the “
–
”
button and it should change to “YES!”
Press “i” one more time and “YES!”
should change to “Reset Clear”.
The trip is now reset.
AL Sensitivity
“Automatic Light Sensitivity”
Adjusts the sensitivity of when the
automatic lights will turn off and on.
The default value is 3.
Exit
Return to the main display screen.
Settings