MJM E-TR20, Руководство пользователя

Страница: 9 / 17

9
·Always be sure to turn the bike “OFF” after each use via the ON/OFF power switch.
If you have left the power switch on or your product have not been charged for a
long period of time, the batteries may reach a stage at which it will no longer hold
charge.
·Be friendly to the environment! Be sure to recycle your old batteries at a local
battery recycling center. Do not throw them in the garbage.
·Frequent “stops and starts” will drain a battery more quickly than sustained. long
term use.
·Even with proper care, rechargeable batteries do not last forever. Average battery
life depends on use and conditions.
Charger
The electric bike comes with its own “Smart Charger” that connects with an easy-
access charger port for recharging the batteries. This charger has lights which show
the battery charge status.
Batteries work best when they have a full charge, so always be sure to recharge
them fully after each ride. If you leave then in a run-down condition, without
recharging them, it will shorten their life expectancy.
Li-Ion (Lithium ion) batteries –charge for 4-6 hours
The charger may get warm to the touch, so make sure you charge they are in an
open area and do not lay anything on the charger unit while charging. Although
you cannot over-charge the batteries using the “Smart Charger”,
We recommend that you do not leave the charger plugged in for more the 24
hours.
If your charger shows a solid green light after charging for a short period of time,
your battery may have been only partially discharged (Short ride), or this may be
the sign of a partially worn out battery reduced charge capacity. Continue
charging for the full time, to cover all the bases. If the battery still has not charged,
you may need to replace it.
Even with Proper care, a rechargeable battery dose not last forever. Average
battery life depends of use and conditions.
The charger and charger port should be regularly inspected for damage (Cord, plug,
enclosure, etc.). If damage is found stop using until the damage part can be
repaired or replaced.