MJ LED LIGHTNING MJ-1057, Руководство пользователя

Страница: 12 / 14

10
Auto Test
Select Auto Test , press the ENTER bu on to confirm, the unit will run built-in programs to
automa cally test pan, lt, shu er, color, CMY, gobo, gobo rota on, prism, prism rota on, iris,
frost, zoom, focus, dimmer and lamp on/off. Press the MENU bu on back to the last menu or exit
menu mode a er auto test.
Manual Test
Select Manual Test , press the ENTER bu on to confirm, the present channel will show on the
display, use the UP / DOWN bu on to select channel, press the ENTER bu on to confirm, then use
the UP and DOWN bu on to adjust the value, press the ENTER bu on to store, the fixture will run
as the channel value indicates. Press the MENU bu on back to the last menu or exit menu mode
idling one minute.
(All channels value will become 0 a er exi ng Manual Test menu)
Fixture Informa on
Enter menu mode, select Fixture Informa on , press the ENTER bu on to confirm, use the
UP / DOWN bu on to select Fixture use me or Firmware Version.
Fixture use hour
Select Fixture use hour , press the ENTER bu on to confirm, fixture use me will show on the
display, press the MENU bu on to exit.
Firmware Version
Select Firmware Version , press the ENTER bu on to confirm, firmware version will show on the
display, press the MENU bu on back to exit.
Reset Func ons
Enter menu mode, select Reset Func on , press the ENTER bu on to confirm, use the UP / DOWN
bu on to select Pan/Tilt, Effect or All.
Pan
﹠
Tilt — Reset Pan/Tilt
Select Pan
﹠
Tilt , press the ENTER bu on to confirm, use the UP / DOWN bu on to select Yes (the
unit will run built-in program to reset pan and lt to their home posi ons) or No (normal), press
the ENTER bu on to store. Press the MENU bu on back to the last menu or let the unit idle one
minute to exit menu mode.
15
5. The end of the DMX 512 system should be terminated to reduce signal errors.
6. 3 pin XLR connectors are more popular than 5 pins XLR.
3 pin XLR: Pin 1: GND, Pin 2: Nega ve signal (-), Pin 3: Posi ve signal (+)
5 pin XLR: Pin 1: GND, Pin 2: Nega ve signal (-), Pin 3: Posi ve signal (+), Pin4, Pin5 not used.
6 .2 Address Se ng
If you use a universal DMX controller to control the units, you have to set DMX address from 1 to 512
so that the units can receive DMX signal.
Press the MENU bu on to enter menu mode, select DMX Func ons , press the ENTER bu on to
confirm, use the UP / DOWN bu on to select DMX Address , press the ENTER bu on to confirm, the
present address will blinking the display, use the UP / DOWN bu on to adjust the address from 001 to
512, press the ENTER bu on to store. Press the MENU bu on back to the last menu or idling let the
unit idle one minute to exit menu mode.
Please refer to the following diagram to address your DMX512 channel for the first 4 units.
Channel mode
Unit 1
Address
Unit 2
Address
Unit 3
Address
Unit 4
Address
17 channels 1 18 35 52
20 channels 1 21 41 61
6.3 DMX 512 Configura on
Please refer to below configura ons to control the fixtures
A en ons:
1. The unit will maintain the last condi on un l reset if you cut-off the DMX signal.
2. For the channel Func on, keep the value for about 5 seconds, then the corresponding func on
will take into effect.
17 Channels (Mode 1):
CHANNEL VALUE FUNCTION
1
000-255
PAN
0 ° ～ 540°