MJ LED LIGHTNING MJ-1051, Руководство пользователя

Страница: 8 / 12

8
Off set(need password)
Pan off set
（
-128
）
-
（
+127
）
Tilt off set
（
-128
）
-
（
+127
）
Colour off set
（
-128
）
-
（
+127
）
Gobo off set
（
-128
）
-
（
+127
）
Focus off set
（
-128
）
-
（
+127
）
Prism off set
（
-128
）
-
（
+127
）
Gobo2 off set
（
-128
）
-
（
+127
）
Advance
Language Switch Yes/No
Screen Rot. Yes/No
Hours Clear Yes/No
Top Temperature 0-120(80)
Hard Ware
Focus Hall x
Gobo Hall x
Gobo2 Hall x
Prism/Frost Hall x
Pan Code Wheel xx
Pan Steps XXXXX
Tilt Code Wheel XX
Tilt Steps XXXXX
Colour Hall X
Tilt Hall X
Sys Infor
versions 170703085610
Total Hours XXXXX
On Hours XXXXX
Temperature XXX
Control panel of LED display information:
Red On Error
Green
On DMX signal ok
Off
No DMX signal
Maintenance:
To prolong the life of the projector, some maintenance work has to be done to ensure the LED
optical system in good condition. If the projector does not function, check the fuses on the power
socket of the projector, they should only be replaced by fuses of the same specification. Should
these be damaged, call a qualified technician before replacement. The projector has thermal
protection device that will switch off the projector in case of overheating. Should either of these
operate, check that the fans are not blocked, and if they are dirty, clean them before switching on the
projector again. Check that the fans are operational, if not, call a qualified technician.
☆
Any maintenance work should only be carried out by qualified technicians.