MJ LED LIGHTNING MJ-1012, Руководство пользователя

Страница: 6 / 8

Beam Moving Head 363 MJ-1012 User Manual ver2.0
www.mjledlighting.com
6
select DMX mode and auto mode, press “ ENTER”, also can choose different DMX mode and auto mode.

When the light in the DMX mode, then also can be slave mode. If the light connect to the DMX control
signal, then it is DMX mode.If you connect the light is Master signal, then it is running slave mode.

Auto mode,auto mode also can be master mode.

When
the light in sound mode, it can’t be master mode.
3) Test mode ,
test mode is a special mode,only can be used when it is in test mode interface,exit interface, then
return to previous running mode.In the test mode,you can adjust Pan,tilt and focus motor’s position,also can
adjust intensity of RGBW color.The RGBW color of test mode can be used by the 16
th
channel in the DMX
mode.
4) Language ,
menu language can setted to Chinese or English.
5) Setup ,

ID code,ID code is using for DMX mode in the channel15
th
,when the value of channel 15
th
over number
9,only ID code corresponding to the front two value which in 16
th
channel,then other channel value are
available now.

Pan reverse set

Tilt reverse set

Fader delay ,
when switch on handspike delay,the controller handspike can achieve soft dimming effect.
Handspike delay can be chosen ON/OFF on the controller.

Sinal link:
When turn on signal link,cut off control signal will be blackout.

Code wheel:
If off,ID code will failure in reset and running mode,c
an’t record correct position of pan and
tilt.Will recover from wrong running operation.Reset can be max travel reset from code wheel reset.

Temp Switch:
Temperature protect’s switch.

Temperature :
Protect temperature, when start temp protect function,if test temperature over protect
temperature,then brightness will be reduce a half.

Screen protect :
It can be set turn off,mode1 and mode 2.When it’s OFF,then won’t enter screen protect
condition.When in mode 1,it will clear the screen.When in mode 2,after you into screen protection,big letter
display current address code.

Screen Rot :
this menu can let the screen inversion 180 degree.

Factory set :
you can set all parameters to factory set.
 Motor Reset :
reset the motor by hand.
 Pan Off Set
:Pan adjustment
 Tilt Off Sit:
Tilt adjustment
6)
Sys info :
display related information on system
i. ON time: the current time when you power on it.
ii. Run time : Total time of using this light
iii. Ver : current verson of software
iv. Running mode : System running mode currently
v. DMX address
vi. Temperature : Display current temperature
IV. Channel List

15CH