LED Moving Head Wash 3610 MJ-1006A User Manual ver2.0
www.mjledlighting.com
6
DMX Terminator:
In the Controller mode, at the last fixture in the chain, the DMX output has to be connected with a
DMX terminator. This prevents electrical noise from disturbing and corrupting the DMX control
signals.
The DMX terminator is simply an XLR connector with a 120Ω (ohm) resistor connected across pins
2 and 3, which is then plugged into the output socket on the last projector in the chain. The
connections are illustrated below.
Function Set:
Picture 1 picture 2
Touch LCD into the main menu, when the LCD is off.
When the LCD display the main menu,touch the menu into
sub menu
.(as picture 1)
Use button switch and LCD display, can set the address code and function code easily.
Check or modify lighting function settings, Touching the LCD display panel. LCD display panel will display
function menu of lighting. Function operation menu all have corresponding submenu(as picture 2) . Each menu
all represent the specific functions of lamps, specific see below "operation menu" section.
Set or browse function setting of lamp, touch UP or DOWN key.
Touch
ENTER
key to save your changes or to
ENTER
submenu, Touch
UP
or
DOWN
can change
value(Plus or reduce number).
According to the
Return
key to return to the last menu.
Return
nn
Up
Down
Enter
Address Set
Run Mode
Test Mode
Language
Set Up
Sys Info
