MJ LED LIGHTNING Inno Pocket Zoom 4, Инструкция по эксплуатации

Страница: 12 / 16

12
Sound Active Mode:
This mode allows either single unit or several units linked together, to run to the beat
of the music.
1. Press the MENU button until “ SOUN ” is displayed, and press ENTER. Press the UP or DOWN buttons so
that “ ON ” is displayed and press ENTER.
2. Press the MENU button until “ SENS ” is displayed, and press ENTER. Use the UP and DOWN buttons to
adjust the sound
sensitivity. Press ENTER when you have found your desired sensitivity level.
Show Mode:
This mode allows either a single unit or several units linked together, to run one of four shows
that you choose.
1. Press the MENU button until “ SHND ” is displayed, and press ENTER.
2. Press the UP or DOWN buttons until you find your desired show, and press ENTER.
Master-Slave Set Up
Master-Slave Operation
This function will allow you to link up to 16 units together and operate without a
controller. The units will be sound activated. In Master-Slave operation one unit will act as the controlling unit
and the others will react to the controlling units programs. Any unit can act as a Master or as a Slave.
1. Using approved DMX data cables, daisy chain your units together via the XLR connector on the rear of the
units. Remember the Male XLR connector is the input and the Female XLR connector is the output. The first
unit in the chain (master) will use the female XLR connector only - The last unit in the chain will use the male
XLR connector only. For longer cable runs we suggest a terminator at the last fixture.
2. On the Master unit press the MENU button until “ SLND ” is displayed, and press ENTER. Use the UP and
DOWN buttons to scroll to the “MAST” setting and press ENTER.
3. After setting the Master unit to the master setting find your desired operating mode.
4. On the slave units press the MENU button until “ SLND ” is displayed, and press ENTER. Choose either
“ SL 1 ” or “ SL 2 ” and press ENTER.
5. The slave units will now follow the Master unit.
DMX Channel Mode
Channel Mode
Function Value Percent / Setting
9CH 11CH 15CH
1 CH 1CH 1CH Pan 000-255 0~100%
2 CH 2CH 2CH Tilt 000-255 0~100%
3CH 3CH 3CH Zoom 000-255 0~100%
4 CH Pan/Tilt/Zoom speed 000-255 From fast to slowly
4 CH 4 CH 5 CH Red 000-255 0~100%
5 CH 5 CH 6 CH Green 000-255 0~100%
6 CH 6 CH 7 CH Blue 000-255 0~100%
7 CH 7 CH 8 CH White 000-255 0~100%
8 CH 8 CH 9 CH Main dimming 000-255 0~100%