Mizuho 7200B, Руководство оператора, Страница: 15 / 20

13
a. Lateral Tilt is achieved by pressing either the
Lateral-Right or Lateral-Left button as desired.
Movement of up to 25° may be obtained.
b.Trendelenburg positioning is achieved by
pressing either the Trendelenburg or Reverse
Trendelenburg buttons.Movement of up to 45°
TREND, 20° REV TREND may be obtained.
c. The return lever, when depressed, automati-
cally returns the table top to level position.
d. Speed Selection. The speed of the table
movements can be changed with the High Speed/
Low Speed functions of the pendant control. See
figure 2-17. Low speed should be selected for
precise positioning when using the foot control.
Figure 2-17. Speed Control Function
2-7. Head Section
a. A quick release positioning bar located under
and to the front of the head section (figure 2-18) is
used to raise or lower the head section. Pull the
release bar toward the head end to allow the
section to pivot up or down. Positioning from 60°
above horizontal to 90° below horizontal in 15°
increments is available. Release the bar to lock the
head section in position.
Figure 2-18. Head Section
By loosening two locking knobs beneath the back
section, an additional 3" of longitudinal adjustment
can be achieved. If desired, the head section may
be removed by loosening the locking knobs and
pulling it straight out of the back section.
2-8. Intermediate Back Section
The intermediate back section, located between
the head section and main back section, is secured
with two locking knobs located under the back
section. See figure 2-19. By loosening the two
locking knobs, an additional 3" of longitudinal ex-
tension can be achieved. If desired, the intermedi-
ate back section may be removed by loosening the
locking knobs and pulling the section straight out of
the back section.
Figure 2-19. Intermediate Back Section
HIGH SPEED
HIGH SPEED
POWER INDICATOR
LOW SPEED
LOW SPEED
POWER INDICATOR
HEAD SECTION
RELEASE BAR
BACK SECTION HEAD SECTION
INTERMEDIATE
BACK SECTION
LOCKING
KNOBS