4
Tilt
User’s Guide
Warnings
The Tilt uses lasers as a light source.
1 – Laser Safety
A focused sheet of laser light is emitted from the front lens of the Tilt. Never look directly
into emitted or reflected laser light — doing so may cause permanent vision loss. Keep the
light path clear of mirrors or other reflective objects that may redirect the laser light.
The Tilt uses Class 3B/IIIb lasers. Consult with your institute’s laser safety officer for
institute safety procedures. Be sure to read and follow all safety instructions from the
laser manufacturer.
2 – Intended Use
This product is intended only to provide tilted excitation for fluorescent samples during mi-
croscopic imaging. During operation, this product must be attached to an approved inverted
microscope stand. Use of the Tilt for any other purpose, including the use of unsupported
microscope stands and laser products, can result in serious injury and property damage.
Complete information on microscope stand compatibility and supported laser products can
be obtained from Mizar Imaging.
3 – Installation
Installation of the Tilt must only be performed by a trained service professional. Improper
setup may impair performance of the Tilt and can result in unsafe exposure laser light.
4 – Removal, Modification, and Repair
Do not attempt to remove or disassemble any part of the Tilt. Any modifications or at-
tempts to repair this product can result in unsafe exposure to laser light. Please contact
Mizar Imaging if the Tilt requires service.
5 – Precautions at Startup
Before operating the Tilt or turning on the laser source, ensure that the optical fiber carry-
ing the laser light is securely fixed to both the Tilt and the laser launch. Check that all safety
features included with the Tilt are in place.
