Introduction
Thank you for your purchasing our U-WAVE-R.
The U-WAVE-R in conjunction with a Mitutoyo U-WAVE-T (available separately) allows
wireless communication of the measurement data from Digimatic-output interfaced tool to
load it to a personal computer for data display. Go through this Quick Manual to properly use
the U-WAVE-R and U-WAVE-T.
Also for the proper use, be sure to go through both the “U-WAVE-R User’s Manual” and
“U-WAVE-T User’s Manual”. After reading, keep this manual safely in place.
1. System Configuration
The U-WAVE is comprised of the following system components illustrated below.
2. Software Installation
2.1. Installing the U-WAVEPAK
The U-WAVEPAK contained in the supplied CD is software necessary for data
communications between the U-WAVE-R and U-WAVE-T. Firstly, install the U-WAVEPAK in
a personal computer.
CAUTION
・
Log in to Windows by 'Administrator'.
・
Do not connect the U-WAVE-R to a personal computer before completing the
U-WAVEPAK installation.
Additionally, for details on U-WAVEPAK operation, refer to the “U-WAVEPAK User’s
Manual” in the “PDF_Manual” folder in the supplied CD.
“Adobe Reader” of Adobe Systems Inc. needs to be installed to read the User’s Manual.
1) Boot a personal computer and load the supplied CD.
2) Using Windows Explorer or the like, run the “Setup.exe” in the “Setup” folder.
(For Windows Vista, press [Allow] button on “User Account Control”.)
3)
4) “Welcome to the U-WAVEPAK Setup Wizard” will boot. Then, press the [Next] button.
5) Go through the “License Agreement” and select [I accept the agreement] if you agree, and
press the [Next] button.
6) “Select Destination Location” appears. Then, press the [Next] button.
7) “Select Start Menu Folder” appears. Then, press the [Next] button.
8)
9) “Ready to Install” appears. Then, press the [Install] button.
10) “Completion the U-WAVEPAK Setup Wizard” appears. Then, press the [Finish] button.
Now, the U-WAVEPAK installation is complete.
2.2. Driver Installation
Next, connect the U-WAVE-R to the personal computer and install the USB driver.
Procedures differ between Windows XP, Windows Vista and Windows 2000.
Follow procedures according to the personal computer used.
For Windows XP:
1) Connect the U-WAVE-R to the personal computer with a USB cable.
2) After a while, the following dialog will be displayed.
3)
4)
No. 99MAL110B2
5) After selecting C:\Program Files\Mitutoyo\UWAVEPAK\Drivers\CDM_U-WAVE\, press the
[OK] button, and on the dialog in step 4), press the [Next] button.
6)
7)
“Completing the Found New Hardware Wizard” will be displayed. Then, press the [Finish] button.
8) The dialog in step 2) will appear again. Then, repeat procedures 2) through 7).
Now, the driver installation is complete. Upon the completion of the driver installation, the
green LED and red one on the U-WAVE-R blink alternately.
For Windows Vista:
1) Connect the U-WAVER-R to a personal computer with a USB cable.
2) After a while, the following dialog will be displayed.
3)
4)
5)
6)
7)
8) Select C:\Mitutoyo\UWAVEPAK\Drivers\CDM_U-WAVE\, press the [OK] button, and then
press the [Next] button on the dialog in step 7).
9)
10) “Found New Hardware – Mitutyo U-WAVE” will be displayed. Then, press the [Close] button.
11) The dialog in step 4) appears again. Then, repeat steps 4) through 10).
Now, driver installation is complete. Upon the completion of the driver installation, the green
LED and red one on the U-WAVE-R blink alternately.
U-WAVE Quick Manual
U-WAVE-R (main unit)
Personal computer
USB cable
Connecting cable
U-WAVE-T
Wireless communication
U-WAVEPAK
(Setting Up/Data
collecting software)
a) Select the language to be used.
b) Press the [OK] button.
a) Select “Create a desktop icon".
b) Press the [Next] button.
a) Select “No, not this time”.
b) Press the [Next] button.
a) Select “Install from a list or specific
location [Advanced].”
b) Press the [Next] button.
Press the [OK] button.
Although a warning about Windows XP logo
authentification will appear, press the
[Continue Anyway] button.
Select “Locate and install driver software”.
a) Select “Search for the best driver in these
locations.”
b) Select “Include this location in the search.”
c) Press the [Browse] button.
Digimatic-output interfaced tool
User’s Manual
Press the [Continue] button.
Press the [Browse] button.
Select “Don’t search online”.
Select “I don’t have the disc.
Show me other options”.
Select “Browse computer for driver software”.
Select “Install this driver software anyway”.
