Europe-EU Declaration of Conformity and Restrictions
Hereby, MITSUMI declares that this Mitsumi WiFi module DWM-W051 is in
compliance with the essential requirements and other relevant provisions of
Directive 1999/5/EC.
This equipment is marked with the
symbol and can be used throughout the
European community.
This indicates compliance with the R&TTE Directive 1999/5/EC and meets the
relevant parts of following technical specifications:
EN 300 328
, Electromagnetic compatibility and Radio spectrum Matters (ERM);
Wideband Transmission Systems; Data transmission equipment operating in the
2.4GHz ISM band and using spread spectrum modulation techniques; Harmonized
EN covering essential requirements under article 3.2 of the R&TTE Directive.
EN 301 489-17
, Electromagnetic Compatibility and Radio spectrum Matters (ERM);
Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part 17: Specific Conditions for Wideband Data and HYPERLAN Equipment.
EN 60950-1
, Safety of Information Technology Equipment.
EN 62311
, Assessment of electronic and electrical equipment related to human
exposure restrictions for electromagnetic fields (0 Hz-300 GHz).
Marking by the symbol
indicates that usage restrictions apply.
France – 2.4GHz for Metropolitan France :
In all Metropolitan départements, wireless LAN frequencies can be used under the
following conditions, either for public or private use:
･
Indoor use: maximum power (EIRP) of 100mW for the entire 2400-2483.5MHz
frequency band
･
Outdoor use: maximum power (EIRP) of 100mW for the 2400-2454MHz band
and with maximum power (EIRP) of 10mW for the 2454-2483.5MHz band
Remark:
This module is for a fixed application only. The OEM integrator will need to conduct
full EMS testing in accordance with EN301 489-17 in the final use configuration.
Caution: Exposure to Radio Frequency Radiation.
This device must not be co-located or operating in conjunction with any other
antenna or transmitter.