MITSUI MTV-DV05, Руководство по обслуживанию

Страница: 4 / 86

SERVICE MANUAL
place.
7. Replace blown fuses within the TV with the fuse specified in the parts list.
8. When replacing wires or components to terminals or tags, wind the leads around the terminal before
soldering. When replacing safety components identified by the international hazard symbols on the
circuit diagram and parts list, it must be the company-approved type and must be mounted as the
original.
9. Keep wires away from high temperature components.
PRODUCT SAFETY NOTICE
CAUTION: FOR YOUR PROTECTION, THE FOLLOWING PRODUCT SAFETY NOTICE SHOULD BE
READ CAREFULLY BEFORE OPERATING AND SERVICING THIS TV SET.
1. Do not slap or beat the cabinet or CRT, since this may result in fire or explosion.
2. Never allow the TV sharing a plug or socket with other large-power equipment. Doing so may result in
too large load, thus causing fire.
3. Do not allow anything to rest on or roll over the power cord. Protect the power cord from being walked
on, modified, cut or pinched, particularly at plugs.
4. Do not place any objects, especially heavy objects and lightings, on top of the TV set. Do not install the
TV near any heat sources such as radiators, heat registers, stove, or other apparatus that produce heat.
5. Service personnel should observe the SAFETY INSTRUCTIONS in this manual during use and
servicing of this TV set. Otherwise, the resulted damage is not protected by the manufacturer.
6. Many electrical and mechanical components in this chassis have special safety-related characteristics.
These characteristics are often passed unnoticed by a visual inspection and the X-ray radiation
protection afforded by them cannot necessarily be obtained by using replacements rated at higher
voltages or wattage, etc. Components which have these special safety characteristics in this manual
and its supplements are identified by the international hazard symbols on the circuit diagram and parts
list. Before replacing any of these components read the parts list in this manual carefully. Substitute
replacement components which do not have the same safety characteristics as specified in the parts list
may create X-ray radiation.
SAFETY SYMBOL DESCRIPTION
The lightning symbol in the triangle tells you that the voltage inside this product may be strong
enough to cause an electric shock. Extreme caution should be exercised when working on the
TV with the back removed.
This is an international hazard symbol, telling you that the components identified by the symbol
have special safety-related characteristics.
FDA
This symbol tells you that the critical components identified by the FDA marking have special
safety-related characteristics.
UL
This symbol tells you that the critical components identified by the UL marking have special
safety-related characteristics.
3