
40
Chapter 2: Operating Your TV
External Audio System
The external audio system selection allows you to turn off the speakers in the
TV when you have connected the TV to a Home Theater Receiver, Audio
Receiver or other stereo system. This will prevent potential mismatches
between the TV speaker volume. To use “Volume Controlled by AV Receiver”
or “AV Receiver at Input 1” set to YES.
⁄
Important:
If you changed the “External Audio System” setting from YES to
NO the speakers in the TV will be turned on again. To prevent
damaging the TV speakers and to prevent a sudden increase of
volume, make sure you have turned down the TV’s volume first.
AV Receiver at Input 1
To make this selection, the ” External Audio System” must be set to YES.
When an AV receiver is connected, to ensure the best possible picture, always
select YES.
Volume Controlled by AV Receiver
To make this selection, the ” External Audio System” must be set to YES.
Some Home Theater Receivers, Audio Receivers and stereo systems use a
remote control for volume setting. If your receiver or stereo system has this
function, set the “Volume Change By AV Receiver” to YES. If your system
does not use a remote control to adjust the volume settings, then set the
“Volume Change By AV Receiver” to NO.
Creating the A/V Connection (Home Theater) (cont.)
Содержание VS-50800
Страница 14: ...12 Preface Welcome to Mitsubishi...
Страница 28: ...26 Chapter 1 Getting to Know Your TV blank page...
Страница 100: ...98 Chapter 4 Troubleshooting Solid Red Page...
Страница 102: ...100 Chapter 5 Troubleshooting SOLID RED PAGE...