background image

– 20 –

WEEKLY TIMER operation 

 

Up to 4 programs with timer operation (ON TIMER / OFF TIMER) are available for each day of the week. Maximum 28 programs per week 
are available. Once this has been set, the timer operation will be repeated at the same programs every week unless the WEEKLY TIMER 
is canceled.

Sample (At cooling season)

WEEKLY TIMER ON/OFF setting

 

Switch the WEEKLY TIMER to ON/OFF by using the WEEKLY button.

1

Press the WEEKLY button.

The WEEKLY TIMER becomes effective.

Every time the WEEKLY button is pressed, the display is switched in the 

order of:

When the WEEKLY TIMER is set to ON, the timer light (yellow) of the 

air-conditioner is on.

When the battery of the remote control is replaced or the ACL switch is 

pressed, the remote control is set to the initial state. Since the WEEKLY 

TIMER program is not set in the initial state, set the program according to the 

setting procedure.

  The WEEKLY TIMER is switched to ON/OFF regardless of 

whether the air-conditioner is running or not.  

  The ON TIMER operation of the WEEKLY TIMER is effective 

regardless of whether the air-conditioner is running or not.

 

When the ON TIMER setting time is reached, the remote 
control operates according to the contents that are set. The 
remote control display is also switched to the operation 
contents that are set. The setting can be changed from the 
remote control after ON TIMER operation of the WEEKLY 
TIMER.

 

The following contents can be set by the ON TIMER.

 

Operation mode, fan speed, temperature, airflow direction, 
ECO, 3D AUTO, NIGHT SETBACK, SILENT 

 

Comfort start-up is not performed for WEEKLY TIMER 
ON TIMER operation.

 

OFF TIMER operation of the WEEKLY TIMER is effective only 
when the air-conditioner is running. When the time set by the 
OFF TIMER is reached, the air-conditioner stops. 

 

When multiple program numbers are set for the current day 
(day of the week), the operation is performed from the earliest 
time that is set. 

   When various timers (ON TIMER, OFF TIMER, and SLEEP 

TIMER) are operating, the WEEKLY TIMER does not operate 
even if the time set in the ON TIMER or OFF TIMER is 
reached. The WEEKLY TIMER becomes effective after various 
timers are terminated.  

   The ON TIMER or OFF TIMER of the same time in the same 

day of the week cannot be set.

   In case WEEKLY TIMER setting is not sent to the unit, TIMER 

light will not turn on even if the WEEKLY button is pressed and 

 is displayed on the remote control.

: WEEKLY TIMER setting

: MANUAL setting

(WEEKLY TIMER on)

(WEEKLY TIMER off)

No display

NOTE

RLF012A104_EN.indd   20

RLF012A104_EN.indd   20

1/13/2017   6:35:43 PM

1/13/2017   6:35:43 PM

Содержание SRK20ZSA-W









































Отзывы: