background image

−23−

−22−

 

CAUTION

Do not use or let use the unit or remote control as play equipment.

    

Improper operations could cause ill health or health disorder.

Never disassemble the remote control.

     If you touch internal parts accidentally, you could get electric shocks or cause trouble.

    Consult your dealer when it is necessary to inspect its interior.

Do not wash the remote control with water or liquid.

    

It could cause electric shocks, fire or break-down.

Do not touch electric parts or operate buttons or screens with wet hands.

    

It could cause electric shocks, fire or break-down.

Do not dispose the remote control by yourself.

    

 It could destruct the environment. Ask your dealer when it is necessary to dispose the 

remote control.

Note

The remote control should not be installed where it is exposed to 

direct sunlight or the ambient temperatures become higher than 40

°

or lower than 0

°

C.

    

It could cause deformation, discoloration or break-down.

Do not use benzene, paint thinner, wipes etc. to clean the remote control.

    

 It could discolor or break-down the remote control. Wipe it with a piece of cloth which is 

squeezed tightly after wetting with diluted neutral detergent. Finish up the cleaning by 

wiping with a piece of dry cloth.

Do not pull or twist the cable of the remote control.

    

It could cause break-down.

Do not tap the remote control buttons or screen with pointed objects.

    

It could damage or cause break-down.

Содержание RC-EX3















































Отзывы: