8
Wrap the coated parts
with a heat contractile
tube.
(2) The cables connected to the QD70 should be placed in a duct or fixed. Not
doing so can cause the QD70, drive unit or cables to be damaged when the
cables swing, move or are pulled carelessly, for example, or to malfunction
due to poor cable connection.
(3) To comply with the EMC Directive and Low-Voltage Directive, always
ground the QD70 to the control box using the shielded cables and AD75CK
cable clamping (Mitsubishi Electric make).
AD75CK
Inside control box
QD
70
20cm(7.88inch)
to 30cm(11.82inch)
Using the AD75CK, you can tie four cables of about 7mm outside diameter
together for grounding.
