Mitsubishi PAR-WR51R-E Скачать руководство пользователя страница 20

Страница: 20 / 21

* When is shown on the remote controller, this indicates that the remote controller is used for

monitoring the room temperature. In this example, the living room temperature monitored by

remote controller 1 is regarded as the room temperature for Zone1. The bed room 2 temperature

monitored by remote controller 4 is regarded as the room temperature for Zone2.

<<2-zone temperature control>>

● A thermistor is built in the remote controller (Room RC) or the main controller (Main RC), or

TH1. The indoor unit refers to temperature monitored by a selected thermistor and controls

temperature for each zone.

● For 2-zone temperature control, one room sensor can be selected for Zone1 and Zone2 sep

arately. The room sensor is used for monitoring room temperature.

● The selection of room sensor can be fixed or changed according to time, using a schedule

timer.

Note: Room sensor can be selected by main controller only.

9. Specifications

Item

Description

Power source

12V DC (powered by indoor unit)

Operating temperature and humidity re-

quirements

Temperature: 0 to 40°C

Humidity 30 to 90%RH (No condensation)

Weight

150 g (excluding a cable)

Dimension (W×H×D)

100 mm × 80 mm × 30 mm

10.

Supplementary information

Product fiche of temperature control

(a) Supplier’s name: MITSUBISHI ELECTRIC CORPORATION

(b) Supplier’s model identifier: PAR-WT50R-E and PAR-WR51R-E

(d) The contribution of the temperature control to seasonal space heating energy efficiency: 4%

Indoor unit Living room Dining room Bed room 1 Bed room 2

Address 1

Address 2

Address 3

Address 4

Receiver

Zone1

Zone2

Содержание PAR-WR51R-E






















Результаты поиска

Содержание PAR-WR51R-E

Отзывы:

Mitsubishi PAR-WR51R-E, Инструкция по установке и настройке, Страница: 20 / 21

Результаты поиска

Содержание PAR-WR51R-E

Отзывы: