24
How to discharge measures by water injection
1) Move the vehicle to an outside well-ventilated area.
2) Turn off the Power switch by pressing it. Remove the 12V auxiliary battery negative terminal.
3) Remove the service lid cover in the footwall under the middle of the second seat.
（
Four clips
）
4) Use an open end wrench (10mm) to remove the service lid. (four nuts)
5) Wear Personal Protective Equipment (PPE) and remove the service plug.
1. Release the lock lever on the service plug.
2. Raise the service plug lever.
3. Remove the service plug by pulling it upward.
6) Place a recovery tray of the injected water under the vehicle.
WARNING;
Always wear Personal Protective Equipment (PPE) when pulling out the service plug.
Service lid cover
Driver’s
ｓｅａｔ
Service plug
1
2
3
