14
Your company internal use only.
Copyright (C) Mitsubishi Electric Corporation.
NR-261UM-07LAN5
DISASSEMBLING PROCEDURES
M3X6
0.7 +0.2/-0.1
Ⓐ
0.4 +0.2/-0.1
2.6X4
Ⓒ
Tighten torque(N
・ｍ）
Screw
No.
Ⓚ
0.7 +0.2/-0.1
M3X10
●
Disassembling procedures
In reverse of assembling procedures.
●
Assembling procedures
1.Remove the tape from Lead-Connector 1 and Lead-Connector 2.
2.See three posts as a guide, put M027 on M069.
3.Screw M080 with the three screws(
Ⓒ
).
4.Connect Lead-Connector 1 and Lead-Connector 2 to M080.
5.Hold two Lead-Connectors with the stylepin.
6.Screw M013 with the three screws(
Ⓐ
) and the one screw(
Ⓚ
).
Ⓒ
x 3
M080: ASSY-PCB-GPS
M027: SHEET-BTM
Lead-Connector 1
Lead-Connector 2
Post
M013: PLATE
Ⓚ
Ⓐ
x 3
Set the dowel.
Set the dowel.
Remove the connector cover.
M069: ASSY-SLIDE
Stylepin