Mitsubishi MELSEC iQ-F, Руководство пользователя

Страница: 156 / 182

154
APPX
Appendix 4 Buffer Memory Areas
CH1 Warning output function (Process alarm)
Set whether to enable or disable the alert output of the process alarm.
For details on the alert output function, refer to the following.

Page 36 Alert Output Function
Setting a value other than the above causes an alert output setting (Process alarm) range error (error code: 1B0  H).
■
Buffer memory address
The following shows the buffer memory address of this area.
■
Enabling the setting
Turn off
→
on
→
off 'Operating condition setting request' (Un\G70, b9) to enable the setting.
■ Default value
The default value is Disable (1).
CH1 Warning output setting (Rate alarm)
Set whether to enable or disable the alert output of the rate alarm.
For details on the alert output function, refer to the following.

Page 36 Alert Output Function
Setting a value other than the above causes an alert output setting (Rate alarm) range error (error code: 1B8  H).
■
Buffer memory address
The following shows the buffer memory address of this area.
■ Enabling the setting
Turn off → on → off 'Operating condition setting request' (Un\G70, b9) to enable the setting.
■
Default value
The default value is Disable (1).
Setting value Setting content
0 Enable
1 Disable
Buffer memory name CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8
CH  Alert output setting (Process alarm) 512 712 912 1112 1312 1512 1712 1912
CH  Alert output setting (Process alarm) (In FX2N allocation
mode function)
1181 1182 1183 1184 1185 1186 1187 1188
Setting value Setting content
0 Enable
1 Disable
Buffer memory name CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8
CH  Alert output setting (Rate alarm) 513 713 913 1113 1313 1513 1713 1913
CH  Alert output setting (Rate alarm) (in FX2N allocation
mode function)
1211 1212 1213 1214 1215 1216 1217 1218