Mitsubishi MELSEC-A series, Руководство по программированию

Страница: 372 / 508

9 - 6
9. ERROR CODE LIST
9.3 Error Code List for AnSHCPU
Table 9.2 shows the error messages, description and cause of error and corrective actions
for A1SJH(S8), A1SH and A2SH(S1). Detailed error codes are stored in D9092 only when
a dedicated instruction for CC-Link is used.
Table 9.2 Error Code List for AnSHCPU
Error Message
Error
Code
(D9008)
Detailed
Error
Code
(D9092)
CPU
States
Error and Cause Corrective Action
"INSTRCT.
CODE ERR"
10 — Stop Instruction code, which cannot be
decoded by CPU module, is included in
the program.
(1) Memory cassette including
instruction code, which cannot be
decoded, has been loaded.
(2) Since the memory contents have
changed for some reason,
instruction code, which cannot be
decoded, has been included.
(1) Read the error step by use of
peripheral equipment and correct the
program at that step.
(2) In the case of memory cassette,
rewrite the contents or replace the
cassette with a memory cassette
which stores correct contents.
101 Instruction code, which cannot be
decoded by CPU module, is included in
the program.
(1) Memory cassette including
instruction code, which cannot be
decoded, has been loaded.
(2) Since the memory contents have
changed for some reason,
instruction code, which cannot be
decoded, has been included.
(1) Read the error step by use of
peripheral equipment and correct the
program at that step.
(2) In the case of memory cassette,
rewrite the contents or replace the
cassette with a memory cassette
which stores correct contents.
103 Device specified by a dedicated
instruction for CC-Link is not correct. Read the error step using a peripheral
device and correct the program of the
step.
104 A dedicated instruction for CC-Link has
incorrect program structure.
105 A dedicated instruction for CC-Link has
incorrect command name.
"PARAMETER
ERROR"
11 — Stop The contents of parameters of CPU
memory have changed due to noise or
the improper loading of memory. (1) Load the memory cassette correctly.
(2) Read the parameter contents of CPU
memory, check and correct the
contents, and write them to CPU
again.
"
MISSING END
INS.
"
12 — Stop There is no ( ) instruction in
the program.
Write instruction at the end of
program.
END FEND END