Mitsubishi LVP-X120A, Руководство пользователя

Страница: 41 / 44

Control this projector by using a personal computer (Continue)
[Example] Turn the power ON (' 'is for ASCII code)
Sending commands Status code from Meaning
from the PC etc. projector
30 30 21 0D Command for POWER ON
'0' '0' '!' ' '
30 30 21 0D Command received
'0' '0' '!' ' ' (Command echo back)
4) Operation commands
The operation commands execute the basic operation setting of this projector.It may not operate when changing
the signal.
Sending commands Status code from Meaning
from the PC etc. projector
30 30 5F 72 31 OD Command for setting the input
'0' '0' '_' 'r' '1' ' ' signal to RGB
30 30 5F 72 31 OD Command received
'0' '0' '_' 'r' '1' ' ' (Command echo back)
Button's name on remote ASCII HEX
+ VOLUME r06 72h 30h 36h
– VOLUME r07 72h 30h 37h
EXPAND r02 72h 30h 32h
{
r53 72h 35h 33h
}
r2b 72h 32h 62h
$
r4f 72h 34h 66h
%
r59 72h 35h 39h
MENU r54 72h 35h 34h
ENTER r10 72h 31h 30h
AUTO PLAY(PC CARD) r32 72h 33h 32h
RELEASE(PC CARD) r22 72h 32h 32h
AUTO POSITION r09 72h 30h 39h
STILL ra4 72h 61h 34h
Sending commands Status code from Meaning
from the PC etc. projector
30 30 72 35 34 OD Command as same as MENU button
'0' '0' 'r' '5' '4' ' '
30 30 72 35 34 OD Command received
'0' '0' 'r' '5' '4' ' ' (Command echo back)
ASCII HEX
POWER ON ! 21h
POWER OFF " 22h
INPUT RGB _r1 5Fh 72h 31h
INPUT VIDEO _v1 5Fh 76h 31h
INPUT CARD _c1 5Fh 63h 31h
• POWER OFF command will not work for 1 minute after the power is turned on.
• POWER ON command will not work for 1 minute after the power is turned off.
[Example] Set the input signal to RGB (' 'is for ASCII code)
[Example] Display MENU selection bar. (' 'is for ASCII code)
5) Remote commands
The some remote control operation can be done by remote command codes.