②
Pull up the lever of the Service Plug and then remove the Service Plug by pulling upward
on the lever.
WARNING;
After removing the Service Plug, keep it in a secure place away from other
dismantlers
to
prevent accidental handling
/improper re-installation
.
There are some high voltage components and wiring cables which retain high voltage for 5
minutes after
disconnecting the 12V battery
. When it is necessary to cut the high voltage
components and wiring cables, wait at least 5 minutes after cutting
before commencing the
next action.
at
7
)
Measurement of the Main drive lithium-ion battery's voltage
WARNING;
A
lways wear eye protection (safety g
la
sses) to protect
your eyes from flying debris.
①
Remove the undercover for the Main drive lithium-ion battery
12
