Mitsubishi i-MiEV 2011, Руководство пользователя

Страница: 117 / 193

For ordinary demisting
Perform the following settings to prevent misting
of the windscreen and door windows, and to heat
the leg area.
1. Set the air selection switch (A) to the outside
position.
2. Set the mode selection dial to the “ ” posi-
tion.
3. Turn the temperature control dial clockwise
or anticlockwise to the desired temperature
between the middle (•) and “H” position.
4. Select the desired blower speed.
5. Push the air conditioning switch (B).
For quick demisting
LHD RHD
1. Set the mode selection dial to the “
” posi-
tion.
2. Turn the temperature control dial clockwise
or anticlockwise to the desired temperature
between the middle (•) and “H” position.
3. Press the MAX switch (A).
NOTE
l
When the mode selection dial is in the “ ”
position, the system operates automatically
and outside air is set automatically.
l To demist effectively, direct the air flow
from the side ventilators towards the door win-
dows.
l Do not set the temperature control dial to the
max. cool position. Cool air will blow
against the window glasses and prevent de-
misting.
l Since demisting or defrosting with the MAX
switch consumes the power greatly, stop the
switch after demisting or defrosting.
Use for a long time may shorten the cruising
range.
Introduction of outside air
E00702200424
To introduce air into the vehicle during hot weath-
er, follow these procedures:
1. Set the mode selection dial to any position
other than “ ” position.
2. Turn the temperature control dial to the mid-
dle (•) position.
3. Set the air selection switch (A) to the outside
position.
4. Select the desired blower speed.
NOTE
l When the temperature control dial is turned
to the middle (•) position while the air condi-
tioning is operating, the air conditioning
turns off.
For pleasant driving
6-08
6