EN-25
3. FEATURE menu
FEATURE
AUTO
AUTO
opt.
MENU POSITION
VIDEO SIGNAL
?
ASPECT
RESET ALL
English
LANGUAGE
A
Ë
OK
SCART INPUT
DISPLAY
INPUT
PASSWORD
FUNCTION
CINEMA MODE
AUTO
1.
SETUP
AUTO
OFF
ITEM SETTING
FUNCTION
ASPECT
AUTO
Select to change the aspect ratio automatically depending on the input
signal. (Select this option for normal use.)
16:9 (FULL)
Select to project images in full size (1920 x 1080 pixels) irrespective of
type of input signal.
REAL
Select to project images in their original size as input.
PASSWORD FUNCTION
Use to enable or cancel the password lock. See page 33 for details.
MENU POSITION
2 options
Use to change the position of the menu.
CINEMA MODE
AUTO
The fi lm mode will be automatically activated when a fi lm source signal is
input.
Select AUTO for normal use.
When
fl icker occurs on the screen, frame dropping or other incorrect
display occurs, or jaggies on slanting lines are remarkable, select either
FILM or VIDEO, which improves the symptom better.
FILM
Fixed to the fi lm mode.
VIDEO
The
fi lm mode will not be activated.
VIDEO SIGNAL
8 options
When AUTO is selected, the appropriate video format is automatically
selected depending on the input signal. If the image isn’t displayed
correctly, select the desired video format manually.
SETUP
AUTO
Select to change the SETUP mode automatically.
OFF
Select to make black lighter.
3.75% / 7.5%
Select to make black thicker.
• When 7.5% is chosen, the brightness is decreased by the set-up can-
cel function for the U.S. Choose OFF when the image is dark.
SCART INPUT
ON / OFF
Choose ON when connecting the projector with a device equipped with
the SCART terminal that can output RGB signal. SCART terminal is used
mainly in Europe. Choose OFF normally. (Available only for the input signal
from the COMPUTER/COMPONENT VIDEO IN 2 terminal.)
LANGUAGE
12 languages
Use to select the language used in the menus.
RESET ALL
OK
Use to reset the settings of the menu (excluding IMAGE CAPTURE,
PASSWORD FUNCTION and LANGUAGE) to the factory setting values.
• CINEMA MODE can be adjusted only when a TV60, TV50, 480i, 576i or 1080i signal is being displayed.
• When SCART INPUT is set to ON, nothing is output to the external monitor.
• When SCART INPUT is set to ON, normal computer signals aren
’
t projected.
• Use a commercially available SCART-Mini D-SUB 15-pin cable when connecting this projector with an AV device equipped
with the SCART terminal.
• Some AV devices equipped with the SCART terminal aren
’
t compatible with this projector.
Menu operation (continued)
