Mitsubishi FX2N-10GM, Руководство по аппаратуре / программированию

Страница: 47 / 274

Specifications 2
2-1
2. Specifications
2.1 Power Supply Specifications
2.2 General Specifications
2.3 Performance Specifications
Table 2.1: Power Supply Specifications
Item FX
2N
-10GM FX
2N
-20GM
Power supply 24V DC -15%, +10%
Allowance power
failure time
The operation is continued if the momentary power failure is 5ms or less.
Power consumption 5W 10W
Fuse 125V AC 1A
Table 2.2: General Specifications
Item Contents
Ambient temperature 0 to 55
°
C (operation). -20 to 70
°
C (storage).
Surrounding humidity 35 to 85%,No condensation (operation). 35 to 90% (storage).
Vibration resistance
Conforms to JIS C0040. 10 to 57Hz: Half 0.035mm amplitude,
57 to 150Hz: 4.9 m/s
2 Acceleration
Sweep count for X,Y,Z: 10 times (80 min in each direction).
Shock resistance
Conforms to JIS C0041. 147m/s
2
acceleration, Action time: 11ms.
3 times in each direction X, Y, Z.
Noise immunity 1,000Vp-p,1
µ
s. 30 to 100Hz, tested by noise simulator.
Dielectric withstand voltage 500V AC > 1 min, tested between all points, terminal and ground.
Insulation resistance 5M
Ω
> 500V DC, tested between all points, terminal and ground
Ground Class 3 (100
Ω
or less)
Use atmosphere
Ambient conditions to be free of corrosive gases. Dust should be mini-
mal.
Table 2.3: Performance Specifications
Item FX
2N
-10GM FX
2N
-20GM
Number of control
axes
One axes
Two axes (two axes or two independent
axes simultaneously)
Application PLC
Bus connection with FX
2N
and the FX
2NC
series PLC. The number of I/O points
occupied is 8 points. An FX
2NC
-CNV-IF is necessary for the connection with the
FX
2NC
series PLC.
Program memory Built-in RAM (3.8 k steps).
Built in RAM (7.8 k steps).
Optional memory board:
FX
2NC
-EEPROM-16 (7.8 k steps).
The memory board with the clock func-
tion cannot be used.
Battery
With built-in FX
2NC
-32BL type lithium
battery.
Longevity and about 3 years (The
guaranteed term is 1 year).
With built-in FX
2NC
-32BL type lithium
battery.
Longevity and about three years (The
guaranteed term is one year).
Positioning unit
Command units: mm, deg, inch, pls, (relativity/absolutely)
Max command value ± 999,999 (32 bits when indirectly specifying)
FX Series Positioning Controllers