Mitsubishi Fuso FK 2010 Скачать руководство пользователя страница 67

Страница: 67 / 362

5-20

Switches and controls

The range selector lever is used to select gear

ranges. Select lever positions carefully to ensure

proper engagement of each gear.

When the gearshift lever is placed in the reverse “R”

position, the backup lamps light up and the backup

buzzer, if provided, sounds simultaneously.

Push the button and move the lever.

Move the lever without pushing the button.

•

Digital display

The upper and lower areas of the digital display

individually show the following:

Upper area: Displays the position where the

range selector is placed. Note that

it displays “6” when you select the

“D” range.

Lower area: Displays the range that is currently

being used by the transmission.

NOTE:

Before starting to move the vehicle forward or back-

ward, you must depress the brake pedal and wait

until the engine speed reaches a regular idling

speed before placing the range selector lever in the

“D” or “R” position.

If you try to move the range selector lever to the “D”

or “R” position while the engine is running faster

than a regular idling speed or the vehicle is in

motion, the safety system may cause the transmis-

sion to remain in neutral. If this happens, a buzzer

will sound and you must then perform the range

selector lever operation again.

2 Mode button

A choice of two driving modes is available to suit the

road conditions and the load being carried.

Pressing the mode button changes the mode back

and forth between Power mode and Normal mode.

When the transmission is in Power mode, the mode

indicator illuminates.

•

Power mode

This is used when a powerful driving force is

needed, such as in mountainous areas, when

carrying heavy loads, and when overtaking

safely on expressways.

•

Normal mode

This is used for normal driving, and provides a

smoother, quieter, and more economical ride.

Button

Digital

display

Z18702

Mode button

Mode indicator

Z18703

FKFM.book Page 20 Wednesday, January 28, 2009 9:21 AM

Содержание Fuso FK 2010











































































































































































































































































































































































Результаты поиска

Содержание Fuso FK 2010

Отзывы:

Бренды по названию

Популярные бренды

Mitsubishi Fuso FK 2010, Руководство пользователя

Результаты поиска

Содержание Fuso FK 2010

Отзывы:

Бренды по названию

Популярные бренды