Mitsubishi FR-A7NC, Инструкция по эксплуатации

Страница: 26 / 106

19
4
4
INVERTER SETTING
4.1 Parameter List
The following parameters are used for the plug-in option (FR-A7NC).
Set the values according to need.
*1 Parameters which can be displayed when the plug-in option (FR-A7NC) is mounted.
*2 The setting is reflected after inverter reset or at the next power-on.
*3 "L.ERR" of the LED flickers if the setting is changed. If the inverter is reset, the setting is reflected and LED turns off.
*4 The setting range differs according to the inverter.
For details, refer to page 58 .
*5 These parameters can be set for the FR-A700 series only.
*6
Pr.544 CC-Link extended setting
= "100, 112, 114, 118" are available with the FR-A700 series-NA/EC version inverter only.
Parameter
Number
Name Setting Range
Minimum
Setting
Increments
Initial
Value
Refer
to
Page
79 Operation mode selection 0 to 4, 6, 7 1 0 21
313
*1
DO0 output selection 0 to 8, 10 to 20, 25 to 28, 30 to 36, 39,
41 to 47, 64, 70, 85 to 99, 100 to 108,
110 to 116, 120, 125 to 128, 130 to 136,
139, 141 to 147, 164, 170, 185 to 199
*4
1 9999 56 314
*1
DO1 output selection
315
*1
DO2 output selection
338 Communication operation command source 0, 1 1 0 25
339 Communication speed command source 0, 1, 2 1 0 25
340 Communication startup mode selection 0, 1, 2, 10, 12 1 0 21
342 Communication EEPROM write selection 0, 1 1 0 28
349
*1
Communication reset selection 0, 1 1 0 36
500
*1
Communication error recognition waiting time 0 to 999.8s 0.1s 0 29
501
*1
Communication error occurrence count display 0 1 0 30
502
*1
Communication error time stop mode selection 0 to 3 1 0 31
541
*1, *5
Frequency command sign selection (CC-Link) 0, 1 1 0 39
542
*1, *2, *3
Communication station number (CC-Link) 1 to 64 1 1 37
543
*1, *2, *3
Baud rate selection (CC-Link) 0 to 4 1 0 38
544
*1, *2
CC-Link extended setting 0, 1, 12, 14, 18, 100, 112, 114, 118
*6
1 0 43
550
*2
NET mode control source selection 0, 1, 9999 1 9999 24
804
*5
Torque command source selection 0, 1, 3, 4, 5, 6 1 0 76