Mitsubishi DY-3A66U-AL, Руководство по обслуживанию

Страница: 26 / 47

2
FEATURES and SPECIFICATIONS
SPECIFICATIONS
AM Radio
Frequency Range : 531 ~ 1710kHz (9kHz step)
Sensitivity : Less than 28dB
Signal/Noise Ratio : More than 45dB
(60dBµV)
FM Stereo Radio
Frequency Range : 87.5 ~ 108.0MHz (100kHz step)
Limiting Sensitivity : Less than 10dB
Signal/Noise Ratio : More than 55dB
(40dBµV)
CD Player
Laser : Semiconductor Laser
DA Convertor : 1bit
Dynamic Range : More than 65dB
Signal/Noise Ratio : More than 65dB
Channel Separation : More than 50dB (1kHz)
Others
Power Supply : DC 13.2V (11~16V)
Test Voltage 13.2V
Negative ground
Battery Back Up Current : Less than 1.0mA
Current Consumption : ACC 2.1A ± 20% (Output 1W)
Maximum Power Output : 45W x 4 (SP output)
Output Impedance : 4 (SP Output)
Dimensions : 178mm x 151.3mm x 100mm
( W x D x H )
Weight : 2.0kg
FEATURES
Radio
AM can preset the 6 stations and FM (FM1/FM2) can pre-
set the 12 stations.
It is able to memory by keep pushing the preset memory
button.
TUNE control by Rotary SW.
ATC function to control BASS/TREBLE sound quality
according to electric field strength when AM is received.
AM noise killer function.
SCAN function : Seeking receivable stations and receiving
5 seconds in each station.
CD Player
In-dash CD auto changer (6disc) function.
Power Loading / Power Eject function.
Equipped with the shock proof memory.
(16M-DRAM)(CD-DA:10.4sec)
Skip recovered function.
(Recovered the condition before skip.)
Protected function of laser pickup stopping at high tem-
perature.
Quick truck selection function.
Any time Eject function. (Eject at the all mode included
ACC OFF.)
Scan function : 10sec
Reload function.
Available for loading 12cm disc only.
MP3 play function.
(MPEG1 AUDIO LAYER3, MPEG2 AUDIO LAYER3)
Repeat function. (One tune)
Random play function.
Fast-forwarding and fast-reversing function.
MP3
Folder Up/Down function by TUNE knob.
Audio Part
High power, 4 channel output. (4 load)
Adjustment of BASS, TREBLE, BALANCE and FADER by
Rotary SW.
ITM (Independent Tone Memory) function to memorize
amount of BASS/TREBLE adjustment according to mode.
Fixed EQ matched to car room sound filed characteristic.
Auto loudness function varies a frequency characteristic by
volume.
The function that controls the amount of change in the low
/ high frequency tone (BASS / TREBLE) adjustment with
the maximum volume.
Others
M-BUS is used the method of communication with CD
changer.
The beep sounds, to check an operation, by using a button
with hold-pushing operation function.
Rheostat function. (The intensity of buttons, panel and LCD
can adjust to link with the intensity of vehicle's instrument
panel lighting.)
The connection of speaker wiring can check by test mode of
the beep in the vehicle's assembly line.
Steering Remote control.
Hands free function.
VES (Video Entertainment System) function.