9
CONNECTIONS
OTHERS
PRECAUTIONS
FEA
TURES
PREP
ARA
TION
TROUBLE-
SHOOTING
CONNECTIONS
CONNECTION WITH SCSI DATA SIGNAL EQUIPMENT
2
2
2
2
2
SETTING SCSI ID SWITCH
Set the SCSI ID switch on the rear panel according to the personal computer connected.
•
Select the ID number among 1 to 6.
•
Turn the arrow to set the ID number with a screwdriver.
•
The default setting is No. 5.
•
No. 7 is provided for personal computer you use and No. 0 is provided for a built-in hard disk.
•
Do not set the ID number to the same setting as the connected equipment.
4
0
3
7
2
6
1
5
SCSI ID
AC LINE
SCSI ID
POWER
SCSI
SCSI
SCSI
Terminator
To SCSI terminal
(Use terminator when no
SCSI device is connceted.)
Digital color printer
To SCSI terminal
To SCSI terminal
Personal computer
2
2
2
2
2
SETTING TO ON LINE STATUS
1
1
1
1
1
Press POWER button on the rear panel to turn on this unit.
2
2
2
2
2
Turn on the power of the personal computer connected.
3
3
3
3
3
Confirm that the indicator above ON LINE button on the front panel
is lit.
•
If the indicator is not lit, press ON LINE button to light the indicator.
ON LINE
AC LINE
POWER
2
2
2
2
2
CONNECTING TO PERSONAL COMPUTER (EXAMPLE)
Connect this unit to a personal computer as shown below.
Make sure to turn off main power of the unit and other equipment before connection.
1
1
1
1
1
Connect the unit and the personal computer with a SCSI cable.
2
2
2
2
2
Set the input select switch on the front panel to SCSI.
SCSI
PARALLEL
USB
