Mitsubishi Apricot FT2200, Системное руководство

Страница: 66 / 125

System Configuration 3-26
3.3 Memory Board
The memory board comes already installed with the basic system. A
total of eight memory banks composed of 16 72-pin SIMM sockets
reside on the board. The sockets accept 8-MB, 16-MB, 32-MB, and
64-MB SIMMs for a maximum of 1 GB memory configuration.
3.3.1 Layout
Figure 3-26 Memory Board Layout
3.3.2 Rules for Adding Memory
Adhere to the following rules when you add system memory.
•
Always install SIMMs from bank 0. You should use the memory
banks consecutively.
•
Always install SIMMs in pairs to fill up a bank. For example, for a
total memory of 16 MB, install two 8-MB SIMMs in a bank. You
can not use a 16-MB SIMM alone for a 16-MB memory.
•
Use only fast-page mode parity SIMMs.
•
Install SIMMs of the same capacity in a configuration. For
example, do not mix an 8-MB SIMM with a 16-MB SIMM.