Mitsubishi 00JCPU, Руководство пользователя

Страница: 172 / 542

5 - 43
5.4 File Operations by GX Developer and Handling Precautions
5.4.1 File operations
Table5.9 shows the functions can be performed to files stored in the program memory, standard ROM, and memory
card by the online functions of GX Developer.
However, the executable operations depend on the password registration setting by GX Developer, status of the
system protect switch of the CPU module, and the CPU module status.
: Executable, : Executable when entered password matches, : Cannot be executed.
*1: The following shows definitions of the alphabets in the Operability field.
A: A password for write protection is set to the file.
B: A password for read and write protections are set to the file.
C: The CPU module is in the RUN status.
D: The system protect switch of the CPU module is on.
Table5.9 File operations executable from GX Developer
File operation Operation detail
Operability
*1
Basic model
QCPU
High Performance
model QCPU
Process CPU
Redundant CPU
A B C A B C D A B C D A B C D
Read from PLC Reads a file from the target memory.
Write to PLC
Writes a file to the program memory or
SRAM card.
Writes a file to the standard ROM.
Verify with PLC
Verifies the file in the target memory and
the file of GX Developer.
Write the program
memory to ROM
Batch-writes files stored in the program
memory to the Flash card.
Batch-writes the files stored in the
program memory to the standard ROM.
Write to PLC (Flash
ROM)
Batch-writes specified files from GX
Developer to the Flash card.
Batch-writes the specified files to the
standard ROM by GX Developer.
Delete PLC data Deletes the files stored on the memory.
Format PLC
memory
Formats a memory.
Arrange PLC
memory Rearranges files stored in a memory at
random.
Online change
(ladder mode) Writes data changed in the ladder mode
to the program memory.