Mitsubishi MOTORS Outlander PHEV 2017, Руководство пользователя

Страница: 203 / 548

Dipper (High/Low beam
change)
E00506201557
When the lamp switch is in the “ ” posi-
tion, the beam changes from high to low (or
low to high) each time the lever is pulled
fully (1). While the high-beam is on, the
high-beam indication lamp in the instrument
cluster will also illuminate.
Headlamp flasher
E00506300199
The high-beams flash when the lever is
pulled slightly (2), and will go off when it is
released.
When the high-beam is on, the high-beam in-
dication lamp in the instrument cluster will il-
luminate.
NOTE
l The high-beams can also flash when the
lamp switch is OFF.
l If you turn the lamps off with the headlamps
set to high-beam, the headlamps are auto-
matically returned to their low-beam setting
when the lamp switch is next turned to the
“
” position.
Automatic high-beam system*
E00538200090
The system switches the headlamp beams
(high/low) when the sensor (A) senses an il-
luminant such as lights of a vehicle in front
or oncoming vehicle or street lamp.
WARNING
l The headlamp beams (high/low) may not
be switched automatically under certain
circumstances. Do not overestimate the
system. It is the responsibility of the driv-
er to switch the headlamp beams (high/
low) manually to suit each driving condi-
tion.
Refer to “Dipper (High/Low beam
change)” on page 6-56
How to use the automatic high-
beam system
E00551500045
1. Rotate the lamp switch to the “ ” posi-
tion or “AUTO” position when the Plug-
in Hybrid EV System is operating.
NOTE
l If the headlamps are on when the lamp
switch is in the “AUTO” position, the auto-
matic high-beam system is triggered.
Combination headlamps and dipper switch
6-56
OGGE17E1
Instruments and controls
6