Mitsubishi MOTORS Mirage 2012, Руководство пользователя

Страница: 74 / 250

Odometer
E00527800067
The odometer indicates the distance travelled.
Tripmeter
E00527900071
The tripmeter indicates the distance travelled be-
tween two points.
Example usage of tripmeter
and tripmeter
It is possible to measure two currently travel-
led distances, from home using tripmeter
and from a particular point on the way using
tripmeter
.
To reset the tripmeter
To return the display to 0, hold down the multi-in-
formation display switch for about 1 second or
more. Only the currently displayed value will be re-
set.
Example
If tripmeter
is displayed, only tripmeter
will be reset.
NOTE
l When disconnecting the battery terminal, the
memory of tripmeter
and are
cleared, and the display returns to “0”.
Meter illumination control
E00537900045
Each time you press the multi-information display
switch (2), there is a sound and the brightness of
the instruments changes.
Bright Dim
1- Brightness level
2- Multi-information display switch
NOTE
l
You can adjust to 8 different levels for when
the tail lamps are illuminated and 8 for when
they are not.
Each time you reduce two brightness levels,
the segment display of the brightness level de-
creases one by one.
l
The brightness level of the instruments is stor-
ed when the ignition switch is turned to the
“LOCK” position or the operation mode is
put in OFF.
l
If you press and hold the switch for longer
than about 1 second, the brightness automati-
cally scrolls through its different levels, and
stops scrolling when you release the switch.
Select your desired level of brightness.
l If the vehicle is equipped with the automatic
lamp control, when the lamp switch is in a po-
sition other than the “OFF” position, the me-
ter illumination switches automatically to the
adjusted brightness, depending on the bright-
ness outside the vehicle.
Driving range display
E00538000014
This displays the approximate driving range (how
many more kilometres or miles you can drive).
When the driving range falls below approximately
50 km (30 miles), “---” is displayed.
NOTE
l The driving range is determined based on the
fuel consumption data. This may vary depend-
ing on the driving conditions and habits.
Treat the distance displayed as just a rough
guideline.
l When you refuel, the driving range display is
updated.
However, if you only add a small amount of
fuel, the correct value will not be displayed.
Fill with a full tank whenever possible.
l On rare occasions, the value displayed for
the driving range may change if you are
parked on an extremely steep incline. This is
due to the movement of fuel in the tank and
does not indicate a malfunction.
l The display setting can be changed to the pre-
ferred units (km or miles).
Refer to “Changing the function settings” on
page 3-07.
Instruments and controls
3-04
OA0X13E4
3