BRAKES
Brake Booster
Vacuum hose
sealant
Vacuum hose
valve
mm (in.)
SERVICE
OF REMOVAL
6.
OF VACUUM HOSE WITH CHECK
NOTE
Since the check valve is fit to the vacuum hose, replace
check valve as an assembly unit together with the
hose if the check valve is defective.
SERVICE POINTS OF INSTALLATION
10.
OF GREASE TO
After applying the specified grease to the
pin
washer, insert the
pin and bend the cotter pin tightly
Grease: MOPAR Multi-mileage Lubricant
Part No. 2525035 or equivalent
7. APPLICATION OF SEALANT TO FITTING
When installing the vacuum hose fitting, apply
sealant to its threaded portion.
6. INSTALLATION OF VACUUM HOSE WITH CHECK
VALVE
Attach the vacuum hose so that it may be inserted to a
dimension illustrated.
Caution
Prevent interference between the check valve and
brake booster.
The vacuum hose at the engine should be securely
connected until it contacts the hexagonal edge of the
fitting, and then should be secured by the hose clip.
