Mitsubishi MOTORS Eclipse Cross 2019, Руководство пользователя

Страница: 234 / 602

Shift paddles position display
The currently selected position is displayed
on the multi-information display.
When a malfunction occurs in
the CVT
There could be a system malfunction if the
warning display or the warning display is
displayed on the information screen in the
multi-information display.
or
NOTE
l The selector lever position display blinks at
the same time as the or warning dis-
play appears.
l
The “A” indicator on the selector lever posi-
tion display will blink only when there is a
problem with the CVT position switch. It is
not seen during normal driving.
CAUTION
l
If malfunction occurs in the CVT while driv-
ing, the warning display or the warning
display will appear on the information
screen in the multi-information display.
In this case, follow these procedures:
[When warning display is showing]
The CVT fluid is overheating. The engine
control may activate to lower the CVT fluid
temperature, causing the engine revolutions
and vehicle speed to decrease. In this case,
take one of the following measures.
• Slow down your vehicle.
•
Stop your vehicle in a safe place, put the
selector lever in the “P” (Park) position,
and open the bonnet with the engine run-
ning to allow the engine to cool down.
After a while, confirm that the warning
display is no longer showing. It is safe to
continue driving if the display is no longer
showing. If the warning display remains,
contact a MITSUBISHI MOTORS Author-
ized Service Point immediately.
[When warning display is showing]
It may be that there is something unusual
happening in the CVT, causing a safety de-
vice to activate. Have the vehicle inspected
by a MITSUBISHI MOTORS Authorized
Service Point immediately.
INVECS-III CVT with 8-step Sports Mode*
6-48
OGKE20E1
Starting and driving
6