Mitsubishi Heavy Industries Superlink SC-WBGW256, Оригинальное руководство пользователя, Страница: 25 / 44

24
2
4
5
3
<To create / edit the Air-conditioner Cell Configuration File on a computer>
・ When the air conditioner which has been listed is not connected, it's possible to delete each row. Even if
the corresponding line is deleted, it shows that the air conditioner is not connected.
・
Air-conditioner Cell No. designation does not have to be in serial order, but in the Overview Monitor
screen, the Air-conditioner Cells are displayed in the order of their cell No.
・ Set the Accounting Type to "MULTI1", "MULTI2", or "RUN/STOP" using one-byte uppercase characters.
・
Set the Cap
acity from 0.0 to 224.0 using one-byte numerals to one decimal place.
・
Do not use ", & < >" '"for each input item. If you enter these characters and upload the file, the screen
may not be displayed correctly. In this case, turn off the power of this gateway, turn on the power again,
and upload the file without ", & < >" '".
1. In the Basic Configuration Menu screen, click “Air-conditioner Cell Configuration
File Upload/Download”.
(See page 20.)
Air-conditioner Cell Configuration File Upload/Download screen
<To download>
2. Select a file format to download.
3. Click the Download button
Specify the save destination, and then save the file.
•CSV : "PACinfo256.csv" file will be saved.
•XML : "PACinfo256.xml" file will be saved.
•XML(Factory Setting) : "defaultPACinfo256xml" file will be saved.
Note
If spreadsheet software, etc., is installed on your computer, you can open the downloaded file in the
software and edit it directly.
<To upload>
4. Click the “Browse” button and select “PACinfo256.csv” or “PACinfo256.xml” saved
on the computer.
5. Click the “Upload” button.
The setting contents of the file are reflected in the Air-conditioner Cell configuration.
Note
The Air-conditioner Cell Configuration File of the SC-WGWNB(256)-A/-B and SC-WGWNB(256)-A/-B
gateways and earlier cannot be uploaded.