-
58
-
Install the interface so that the connection cable can reach the indoor unit
(approximately 1.3 m).
If the connection cable is extended, operation will be faulty, so do not
extend the cable.
Fasten the unit to a wall, pillar or similar location.
Use a side cutter or similar tool to open the
thin knockouts in the case for running wires.
1
Mount the lower case of the interface
unit to a flat surface using the wood
screws supplied with the unit.
2
Mount the upper case.
1
Recess the electrical box (procured locally) and
each connection cable inside the wall.
2
Fasten the lower case of the interface unit to the
electrical box using screws (M4 screws,
procured locally).
3
Mount the upper case to the lower case.
1
Mount the interface unit’s upper case.
2
Mount the mounting bracket to the
interface unit using the tapping screws
supplied with the unit.
3
Mount the mounting bracket to a wall
surface, etc. using the wood screws
provided.
Interface installation
If the unit is mounted directly to a wall
Recessing the unit in a wall
Mounting with the mounting bracket
3
Mount the bracket on a wall or pillar
(
2
wood screws)
3
Mount the upper case
Connection cable
Wiring inlet
Wiring inlet
Electrical box
(procured locally)
2
Fasten it to the electrical box.
2 M4 screws
(procured locally)
1
Fasten it to a wall or pillar
(
2
wood screws)
1
Recess the electrical box and
connection cables
2
Mount the upper case
2
Mount the mounting bracket
on the interface unit.
(
3
tapping screws)
