background image

EN-2

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsu-
lated "dangerous voltage" within the product’s enclosure that may be of suffcient magnitude to constitute a risk of electric shock. 

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and 
maintenance (servicing) instructions in the literature accompanying the appliance. 

WARNING 

Use the attached specified power supply cord. If you use another 
power supply cord, it may cause interference with radio and television 
reception. 

Use the attached RGB cable with this equipment so as to keep inter-
ference within the limit of an FCC Class B device.

This apparatus must be grounded. 

DO NOT LOOK DIRECTLY INTO THE LENS WHEN THE 
PROJECTOR IS IN THE POWER ON MODE. 

CAUTION 

Not for use in a computer room as defined in the Standard for the 
Protection of Electronic Computer/Data Processing Equipment, 
ANSI/NFPA 75. 

The attached power cord is to be used exclusively for this product. 
Never use it for other products.

When using the projector in Europe: 
COMPLIANCE NOTICE 

This Projector complies with the requirements of the EC Directive 89/
336/EEC "EMC Directive" as amended by Directive 92/31/EEC and 
93/68/EEC, and 73/23/EEC "Low Voltage Directive" as amended by 
Directive 93/68/ EEC. 

The electro-magnetic susceptibility has been chosen at a level that 
gains proper operation in residential areas, on business and light 
industrial premises and on small-scale enterprises, inside as well as 
outside of the buildings. All places of operation are characterized by 
their connection to the public low voltage power supply system. 

WARNING 

Use the attached RGB cable with this equipment so as to keep inter-
ference within the limits of an EN55022 Class B device.

Please follow WARNING instructions.  

WARNING: 

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.  

CAUTION: 

TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUT-
LET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.  

NOTE: 

SINCE THIS PROJECTOR IS PLUGGABLE EQUIPMENT, THE SOCKET-OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND 
SHALL BE EASILY ACCESSIBLE. 

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

 

: TO REDUCE THE RISK OF ELECTRIC

SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

Note: 

This symbol mark is for 

EU countries only.

This symbol mark is according to 
the directive 2002/96/EC Article 
10 Information for users and 
Annex IV.

Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality 
materials and components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-of-life, should 
be disposed of separately from your household waste.
Please, dispose of this equipment at your local community waste collection/recycling 
centre.
In the European Union there are separate collection systems for used electrical and 
electronic product.
Please, help us to conserve the environment we live in!

Содержание XD206U































Отзывы: