background image

4

 

For assistance call 1(800) 332-2119

Important  Safety Instructions

Please read the following safeguards for your TV and 
retain for future reference.  Always follow all warnings 
and instructions marked on the television.

1)  Read these instructions.

2)  Keep these instructions.

3)  Heed all warnings.

4)  Follow all instructions.

5)  Do not use this apparatus near water.

6)  Clean only with dry cloth.

7)  Do not block any ventilation openings. Install in 

accordance with the manufacturer’s instructions.

8)  Do not install near any heat sources such as 

radiators, heat registers, stoves, or other apparatus 

(including amplifiers) that produce heat.

9)  Do not defeat the safety purpose of the polarized 

or grounding-type plug. A polarized plug has two 
blades with one wider than the other. A grounding 
type plug has two blades and a third grounding 
prong. The wide blade or the third prong are 
provided for your safety. If the provided plug does 

not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet.

10)  Protect the power cord from being walked on 

or pinched particularly at plugs, convenience 

receptacles, and the point where they exit from the 
apparatus.

11)  Only use attachments/accessories specified by the 

manufacturer.

12)  Use only with the cart, 

stand, tripod, bracket, 
or table specified 
by the manufacturer, 
or sold with the 
apparatus. When 
a cart is used, use 
caution when moving 
the cart/apparatus 
combination to avoid 
injury from tip-over.

13)  Unplug this apparatus 

during lightning storms or when unused for long 
periods of time.

14)  Refer all servicing to qualified service personnel. 

Servicing is required when the apparatus has been 
damaged in any way, such as power-supply cord or 
plug is damaged, liquid has been spilled or objects 

have fallen into the apparatus, the apparatus has 
been exposed to rain or moisture, does not operate 
normally, or has been dropped.

ANT E NNA
LE AD IN W IR E

ANT E NNA
DIS C HAR G E  UNIT
(NE C  AR T IC LE  810-20)

G R OUNDING
C ONDUC T OR S
(NE C   AR T IC LE   810-21)

G R OUND  C LAMP S

P OW E R   S E R V IC E   G R OUNDING
E LE C T R ODE   S Y S T E M
(NE C  AR T  250, P AR T  H)

G R OUND  C LAMP

E LE C T R IC
S E R V IC E
E QUIP ME NT

NE C   —  NAT IONAL  E LE C T R IC AL  C ODE

E X AMP LE   OF   ANT E NNA  G R OUNDING

Outdoor Antenna Grounding

If an outside antenna or cable system is connected 
to the TV, be sure the antenna or cable system is 
grounded so as to provide some protection against 
voltage surges and built-up static charges.

Replacement Parts

When replacement parts are required, be sure the 
service technician has used replacement parts speci-
fied by the manufacturer or have the same character-
istics as the original part.  Unauthorized substitutions 
may result in fire, electric shock or other hazards.

Содержание WD-73640









































Отзывы: