Mitsubishi Electric R16MTCPU, Руководство пользователя

Страница: 76 / 90

74
APPENDICES
Appendix 1 Cables
APPENDICES
Appendix 1
Cables
In this cable connection diagram, maker names of connectors are omitted. Refer to connector for maker names of connectors.
(

Page 82 Connector)
SSCNETIII cables
Generally use the SSCNET

cables available as our products. Refer to SSCNET

cables manufactured by Mitsubishi
Electric System & Service for long distance cable up to 100(328.08)[m(ft.)] and ultra-long bending life cable. (

Page 79
SSCNETIII cables (SC-J3BUS □ M-C) manufactured by Mitsubishi Electric System & Service)
Model explanation
Numeral in the column of cable length on the table is a symbol put in the "  " part of cable model. Cables of which symbol
exists are available.
*1 For the cable of less than 30[m](98.43[ft.]), contact your nearest Mitsubishi sales representative.
Specifications
*1 This temperature range for use is the value for optical cable (cord) only.
*2 Dimension of connector fiber insert location. The distance of two cords is changed by how to bend it.
Cable model Cable length [m(ft.)] Bending
life Application
/remark
0.15
(0.49
) 0.3
(0.98
) 0.5
(1.64
) 1
(3.28
) 3
(9.84
) 5
(16.40
) 10
(32.81
) 20
(65.62
) 30
(98.43
) 40
(131.23
) 50
(164.04
)
MR-J3BUS  M 015 03 05 1 3 Standard Standard cord
for inside
panel
MR-J3BUS  M-A 5 10 20 Standard Standard
cable for
outside panel
MR-J3BUS  M-B
*1
30 40 50 Long
bending
life Long distance
cable
Item Description
SSCNET

cable model MR-J3BUS  M MR-J3BUS  M-A MR-J3BUS  M-B
SSCNET

cable length [m(ft.)] 0.15(0.49) 0.3 to 3(0.98 to 9.84) 5 to 20(16.40 to 65.62) 30 to 50(98.43 to 164.04)
Optical
cable
(Cord) Minimum bend
radius [mm(inch)] 25(0.98) Enforced covering cord: 50(1.97)
Cord: 25(0.98) Enforced covering cord: 50(1.97)
Cord: 30(1.18)
Tension strength [N] 70 140 420 (Enforced covering cord) 980 (Enforced covering cord)
Temperature range
for use [

(

)]
*1
-40 to 80(-40 to 176) -20 to 70(-4 to 158)
Ambient Indoors (no direct sunlight), No solvent or oil
External appearance
[mm(inch)]
(0.09±0.003)
10.16
*2
(0.40)
2.2±0.07
2.2±0.07
4.4±0.1
(0.17±0.004)
(0.09±0.003)
4.4±0.1
(0.17±0.004)
6±0.2
(0.24±0.008)
2.2±0.07
(0.09±0.003)
4.4±0.4
(0.17±0.016)
7.6±0.5
(0.30±0.02)
2.2±0.2
(0.09±0.008)