7
GB
D
F
SW
I
NL
E
P
5. Press the Mode (Return) button
2
to complete the setting procedure. This
will return the display to the standard control screen, where
1
will now show
the newly set day and time.
Note:
•
Remote controller is equipped with a simplified clock with a precision
of about + or - one minute per month.
3.6. Using the timer
This section explains how to set and use the timer. You can use Function Selec-
tion of remote controller to select which of three types of timer to use:
1
Weekly
timer,
2
Simple timer, or
3
Auto Off timer.
For information about how to set the Function Selection of remote controller,
refer to Installation Manual.
3.6.1.
Using the Weekly Timer
■
The weekly timer can be used to set up to eight operations for each day of
the week.
• Each operation may consist of any of the following: ON/OFF time together
with a temperature setting, or ON/OFF time only, or temperature setting
only.
• When the current time reaches a time set at this timer, the air conditioner
carries out the action set by the timer.
■
Time setting resolution for this timer is 1 minute.
Notes:
*1. Weekly Timer/Simple Timer/Auto Off Timer cannot be used at the same
time.
*2. The weekly timer will not operate when any of the following conditions
is in effect.
The timer feature is off; the system is in an malfunction state; a test run
is in progress; the remote controller is undergoing self-check or re-
mote controller check; the user is in the process of setting a function ;
the user is in the process of setting the timer; the user is in the process
of setting the current day of the week or time; the system is under cen-
tral control. (Specifically, the system will not carry out operations (unit
on, unit off, or temperature setting) that are prohibited during these
conditions.)
s
How to Set the Weekly Timer
1. Be sure that you are at a standard control screen, and that the weekly
timer indicator
1
is shown in the display.
2. Press the Timer Menu button
B
, so that the “Set Up” appears on the
screen (at
2
).
(Note that each press of the button toggles the display between “Set Up”
and “Monitor”.)
3. Press the Timer On/Off (Set Day) button
9
to set the day. Each press
advances the display at
3
to the next setting, in the following sequence:
“Sun Mon Tues Wed Thurs Fri Sat”
→
“Sun”
→
...
→
“Fri”
→
“Sat”
→
“Sun
Mon Tues Wed Thurs Fri Sat”...
4. Press the
or
Operation button (
7
or
8
) as necessary to
select the appropriate operation number (1 to 8)
4
.
* Your inputs at Steps 3 and 4 will select one of the cells from the matrix
illustrated below. (The remote-controller display at left shows how the
display would appear when setting Operation 1 for Sunday to the val-
ues indicated below.)
Operation No.
Day Setting
˚C
SUN
ON
WEEKLY
PAR-21MAA
ON/OFF
FILTER
CHECK
OPERATION
CLEAR
TEST
TEMP.
MENU
BACK
DAY
MONITOR/SET
CLOCK
ON/OFF
2
4
2
3
A 9
78
0
4
1
3
B
1
Setup Matrix
Note:
By setting the day to “Sun Mon Tues Wed Thurs Fri Sat”, you can set the
same operation to be carried out at the same time every day.
(Example: Operation 2 above, which is the same for all days of the week.)
s
Setting the Weekly Timer
5. Press the appropriate Set Time button
A
as necessary to set the desired
time (at
5
).
* As you hold the button down, the time first increments in minute inter-
vals, then in ten-minute intervals, and then in one-hour intervals.
6. Press the ON/OFF button
1
to select the desired operation (ON or OFF),
at
6
.
* Each press changes the next setting, in the following sequence: No dis-
play (no setting)
→
“ON”
→
“OFF”
7. Press the appropriate Set Temperature button
3
to set the desired tem-
perature (at
7
).
* Each press changes the setting, in the following sequence: No display
(no setting)
⇔
24
⇔
25
⇔
...
⇔
29
⇔
30
⇔
12
⇔
...
⇔
23
⇔
No display.
(Available range: The range for the setting is 12
°
C to 30
°
C. The actual
range over which the temperature can be controlled, however, will vary
according to the type of the connected unit.)
8. After making the appropriate settings at Steps 5, 6 and 7, press the Filter
button
4
to lock in the values.
To clear the currently set values for the selected operation, press and quickly
release the Check (Clear) button
0
once.
* The displayed time setting will change to “—:—”, and the On/Off and
temperature settings will all disappear.
(To clear all weekly timer settings at once, hold down the Check (Clear)
button
0
for two seconds or more. The display will begin flashing, indi-
cating that all settings have been cleared.)
Note:
Your new entries will be cancelled if you press the Mode (Return) button
2
2
2
2
2
before pressing the Filter
button
4
4
4
4
4
.
If you have set two or more different operations for exactly the same time,
only the operation with the highest Operation No. will be carried out.
9. Repeat Steps 3 to 8 as necessary to fill as many of the available cells as
you wish.
10.Press the mode (Return) button
2
to return to the standard control screen
and complete the setting procedure.
11.To activate the timer, press the Timer On/Off button
9
, so that the “Timer
Off” indication disappears from the screen.
Be sure that the “Timer Off”
indication is no longer displayed.
* If there are no timer settings, the “Timer Off” indication will flash on the
screen.
s
How to View the Weekly Timer Settings
1. Be sure that the weekly timer indicator is visible on the screen (at
1
).
2. Press the Timer Menu button
B
so that “Monitor” is indicated on the screen
(at
8
).
3. Press the Timer On/Off (Set Day) button
9
as necessary to select the day
you wish to view.
4. Press the
or
Operation button (
7
or
8
) as necessary to change
the timer operation shown on the display (at
9
).
* Each press will advance to the next timer operation, in order of time set-
ting.
5. To close the monitor and return to the standard control screen, press the
Mode (Return) button
2
.
˚C
SUN
ON
WEEKLY
6
7
5
Shows the selected operation (ON or OFF)
*
Does not appear if operation is not set.
Shows the temperature setting
*
Does not appear if tempera-
ture is not set.
Shows the time
setting
Op No.
Sunday
Monday
···
Saturday
• 8:30
• ON
• 23
°
C
• 10:00
• OFF
• 10:00
• OFF
• 10:00
• OFF
• 10:00
• OFF
▲
<Operation 1 settings for
Sunday>
Start the air conditioner
at 8:30, with the tem-
perature set to 23
°
C.
<Operation 2 settings for
every day>
Turn off the air condi-
tioner at 10:00.
▲
No. 1
No. 2
···
No. 8
˚C
TIMER
SUN
ON
OFF
WEEKLY
1
9
8
Timer Setting
Содержание PRH-P200
Страница 14: ......
